Microtek MHP1-HD - Manual (Page 33)

33
42" PLASMA DISPLAY
Selecting Input Source
The Source menu enables you to set an input source when connecting an antenna or using video
equipment (such as a DVD or VCR). Set the source to match the type of connection you have made
between the PDP and the video equipment. See Chapter 3 “Making Connections” for more information.
Most of the sources are grouped into Group 1 or Group 2 sources. HDTV (YPbPr) is selected
individually. The TV/Video button on the remote control can also be used to set the source. Details on
how to use the TV/Video button can be found in the section, “Selecting the Input Source” in Chapter 4:
Getting Started.
To set input source for the main screen:
1. Press the MENU button to view the main menu.
2 Press the UP/DOWN ( / ) button to select “Source”, then press the ENTER button.
3. Press the UP/DOWN/LEFT/RIGHT ( / / / ) button to select the appropriate input source, then
press the ENTER button to confirm your selection.
4. Press the MENU button twice to exit the menu.
The following table describes each item in the Source menu:
Item Description
HDTV (YPbPr) Selects component video (YPbPr) input source.
Group 1* YCbCr: Selects component video (YCbCr) input source.
Video 1: Selects composite video input source.
TV1**: Selects TV input source. TV input can come from air
transmission or cable. See the section “Adjusting TV Settings”
in this chapter for more information.
S-Video 1: Selects S-Video input source.
Group 2* Video 2: Selects composite video input source.
TV2: Selects TV input source. TV input can come from air
transmission or cable. See the section “Adjusting
TV Settings” in this chapter for more information.
S-Video 2: Selects S-Video input source.
PC VGA: Selects VGA (computer) input source.
DVI: Selects DVI (computer or DVI device equipment) input source.
* Group 1 and Group 2 input sources cannot be selected together. Thus, if a Group 1 input source is
selected, Group 2 input sources are unavailable.
** When PDP has one-tuner support module, only “TV” option will appear on the screen.