Microtek MHP1-HD - Manual (Page 36)

36
Viewing Picture-in-Picture (PIP)
The PIP (Picture-in-Picture) window is a small window within the main window that displays
programming from other channels or input sources. You can control the PIP source and PIP position
through the PIP submenu or remote control.
To access PIP the window settings:
1. Press the MENU button to view the main menu.
2. Press the UP/DOWN ( / ) button to select “PIP”, then press the ENTER button.
3. Press the UP/DOWN ( / ) button to select the item you would like to set.
4. Press the LEFT/RIGHT ( / ) button to toggle through option settings for a user setting, then press
the MENU button twice to exit the menu.
The following table describes each item in the PIP menu:
Item Description
Source Sets the input source for the PIP window. Available input sources are: Video 1,
TV1, YCbCr, S-Video 1, Video 2, TV2, and S-Video 2. By default, the PIP
window is not activated, but it is activated automatically when a source is set for
the PIP window using the on-screen menu. You can also set the PIP source by
pressing the PIP and SOURCE button on the remote control.
Position Sets the position of the PIP window within the main screen. Select from Up Left,
Up Right, Lower Left, Lower Right.
* Before opening a PIP window, you should set the desired input sources for the main screen and select
a PIP input souce for the PIP window.