Microtek MHP1-HD - Manual (Page 37)

37
42" PLASMA DISPLAY
Opening a PIP Window
To open a PIP window:
1. Select an input source for the main screen first by
pressing the TV/VIDEO button on the control button or
use the on-screen menu.
When the button is pressed, the name of the available
input sources appear on the screen. Press the UP/DOWN
( / ) button to move through available sources, then
ENTER to confirm your selection.
To close a PIP window, press the PIP button again.
Selecting PIP Input Source
To select a PIP window source, press the SOURCE button on
the remote control or use the on-screen menu.
The name of the available input sources appear on the screen.
Press UP/DOWN ( / ) button to move through available
sources, then ENTER to confirm your selection.
If the main screen detects the input source, the detected
image will be displayed on the main screen immediately.
2. Press the PIP button on the remote control to open a PIP
window.
When the button is pressed, the PIP window appears in
the corner of the screen.
If the PIP window detects the input source, the detected
image will be displayed on the PIP window immediately.
NOTE: If the PIP window does not appear on the screen
when the PIP button is pressed, press the SOURCE button
on the remote control to select an available PIP input
source from the displayed list.