Microtek MHP1-HD - Manual (Page 34)

34
Adjusting TV Settings
The TV menu enables you to set the PDP source, set up channels, and access secondary audio
programs.
To access TV settings:
1. Press the MENU button to view the main menu.
2 Press the UP/DOWN ( / ) button to select “TV”, then press the ENTER button.
3. Press the UP/DOWN ( / ) button to select the item you would like to set.
4. Press the LEFT/RIGHT ( / ) button to toggle through option settings for a user setting.
If you choose “Scan”, press the ENTER button to start scanning for channels.
5. Press the MENU button twice to exit the menu.
The following table describes each item in the TV submenu:
Item Description
Antenna* Sets the TV input source. Select Air or Cable.
This feature can also be adjusted by pressing the AIR/CABLE button on the
remote control.
System* Selects the TV standard used in your region. Choose STD, HRC, or IRC for NTSC
system; BG, DK, DK, I, or SECAM for PAL system, depending on the type of
cable system you used for connection.
MTS* The Multi-Channel Sound (MTS) feature enables you to switch between high
quality stereo sound and secondary audio channel (SAP), if available. Secondary
audio channels are often used to broadcast the audio element in a second
language, music, or other information. Set to SAP, MONO, or STEREO. This
feature can also be adjusted by pressing the MTS button on the remote control.
Scan* Scans for active channels and hides inactive channels.
The Scan feature can also be started by pressing the CH SCAN button on the
remote control.
Edit* Enables the addition or deletion of individual channels.
Preview Shows a preview of channels in nine-thumbnail pictures. Use the UP/DOWN/
LEFT/RIGHT ( / / / ) button to select a channel you would like to view, then
ENTER to watch the TV program.
* For more details on Antenna, System, MTS, Scan, and Edit functions, see Chapter 4: Getting Started.