Microtek MHP1-HD - Manual (Page 35)

35
42" PLASMA DISPLAY
Adjusting PC Display Settings
Individual PC display settings can be adjusted in the PC menu. PC settings can also be automatically
adjusted by selecting the Auto option.
To access PC display settings,
1. Press the MENU button to view the main menu.
2 Press the UP/DOWN ( / ) button to select “PC”, then press the ENTER button.
3. Press the UP/DOWN ( / ) button to select the item you would like to adjust.
4. Press the LEFT/RIGHT ( / ) button to adjust slider bars or to increase/decrease the value of a user
setting. If you choose “Auto”, press the ENTER button to adjust automatically.
5. Press the MENU button twice to exit the menu.
The following table describes each item in the PC menu:
Item Description
Auto Automatically adjusts image Clock, Phase, H-Position, V-Position, Contrast, and
Brightness settings.
Clock Adjusts the display’s pixel alignment and corrects flickering when connected to a
computer output. The PDP must be properly synchronized with the computer
display output to avoid flickering and unclear images.
Phase Adjusts the clarity and focus of the display when connected to a computer output.
The PDP must be properly synchronized with the computer display output to
avoid unclear images.
H Position Adjusts the horizontal position of the display.
V Position Adjusts the vertical position of the display.
Contrast Adjusts the difference between the lightest and darkest shades on the display.
Brightness Adjusts the level of light of the display.