Chapter 2. tv connections, Figure 4. connecting a device with s-video – MITSUBISHI ELECTRIC WD-62530 User Manual

Page 22

Advertising

Chapter 2. TV Connections

HDTV Cable Box or Satellite
Receiver with Component Video

If your cable box or satellite receiver has HDMI or DVI
outputs, use the connections for HDMI or DVI video
devices described later in this chapter.
Required: RCA component video cables, left/right analog
audio cables.
A coaxial splitter, available at most electronic supply
stores, may be required to complete this installation

1. Connect the cable from the outside cable or satel-

lite service to

CABLE IN or SATELLITE IN on

the cable box or satellite receiver. See your device’s
owner’s guide for instructions and cable compatibility.

��

��
��

��
��
��
��

��

�

��

�

��

�

��

��
��

�

��

�

��

��
��
��

��
��

��

��
��
��

Figure 3. Connecting an external HDTV receiver with
component video connections

2. Connect RCA-type cables from the Y Pb Pr outputs

on the cable box or satellite receiver to

COMPO-

NENT INPUT on the TV back panel, matching the
colored connections.

3. Connect left (white) and right (red) audio cables from

the cable box or satellite receiver to

COMPONENT

INPUT AUDIO L and AUDIO R on the TV back
panel.

4. Optional: To allow use of the Split Screen feature

with channels from

ANT 1 and the cable box,

connect the incoming terrestrial antenna or cable
service (not satellite) to

ANT 1/MAIN on the TV

back panel. A coaxial splitter, available at most elec-
tronics supply stores, may be required to complete
this installation.

Note: To receive the beneﬁts of digital surround sound,

connect the digital audio output from your HDTV
cable box or satellite receiver directly to your digi-
tal A/V receiver

If your cable box or satellite receiver has HDMI
or DVI outputs, please see “HDMI Device” and
“DVI Device” connections later in this chapter.

Standard Cable Box, Satellite

Receiver, or Other Device with

S-Video

Required: S-Video cable and left/right analog stereo
audio cables.

1. Connect the cable from the outside cable or satellite

service to

CABLE IN or SATELLITE IN on the

cable box or satellite receiver.

2. Connect an S-Video cable from

VIDEO OUT on the

cable box or satellite receiver back panel to

INPUT

S-VIDEO on the TV back panel.

3. Connect left (white) and right (red) audio cables from

AUDIO OUT on the cable box or satellite receiver to

INPUT/AUDIO L and AUDIO R on the TV back
panel.

Note: Refer to the cable box or satellite receiver Owner’s

Guide for cable or dish antenna connections to the

receiver.

��

��
��

��
��
��
��

��

�

��

�

��

�

��

��
��

��

Figure 4. Connecting a device with S-Video

Advertising

Popular Brands

Popular manuals