MITSUBISHI ELECTRIC WD-62530 - Manual (Page 41)

Chapter 4. TV Menu Settings 41
Setup
Select English or Spanish for menus and
on-screen displays.
Memorize the available channels for the
antenna or cable service connected to the
ANT 1 and ANT 2 jacks.
Set the TV’s internal clock either manually
or have the TV set the clock automatically.
Set the TV Timer to turn on the TV auto-
matically at a designated time.
• Set the energy mode for power consump-
tion when the TV is powered off.
• Turn off Demo Mode.
View the TV’s software version.
Input Name
Assign useful names to TV inputs so that you
can easily find them in the Input Selection
menu.
Icon Order
Rearrange icons in the Input Selection menu to
put frequently used input devices first.
Channel
Edit channels for the ANT 1 and ANT 2
inputs.
Manually add or delete channels from
memory, name channels, or add your
favorite channels to a
FAV (Favorites) list.
View signal strength of a currently tuned
digital channel.
Main Menu
Press MENU on the remote control to open the Main menu,
figure 1. See below for an overview of the options available
through the Main menu.
Figure 1. Main menu.
Captions
Display closed captions (if sent by the
broadcaster).
Select settings for analog or digital cap-
tions.
Parental Lock
Block or allow programming based on
rating signals sent by the broadcast station.
Lock the TV by time.
Lock the front-panel buttons.
Audio/Video
Reset a selected input’s A/V memory to the
original factory settings.
Customize individual audio and video set-
tings.
Display a blue screen when viewing an
input with no video signal or a poor video
signal.
Enable/disable Film Mode.
Turn the TV speakers on or off.