MITSUBISHI ELECTRIC LT-40133 - Manual (Page 13)

13
TV Set-Up
Getting Started
1. Review the important safety, installation, and oper-
ating information at the beginning of this book.
2. Choose a location for your TV.
• Allow at least four inches of space on all sides
of the TV to help prevent overheating. Over-
heating may cause premature failure of the TV.
• Avoid locations where light may reflect off the
screen.
3. Install the batteries in the remote control. See the
following page. See chapter 4, “TV Operation and
Features” for more on use of the remote control.
4. Plug your TV into a power outlet. The POWER indica-
tor on the front lower-left corner of the TV will start
blinking rapidly. After the
POWER indicator stops
blinking, press the POWER key (TV side panel or
remote control) to power on the TV.
5. When the Welcome screen appears the first time
you power on the TV, select a language for TV
menus. You can later change the language through
the
Setup menu.
6. Connect your audio/video (A/V) devices to the TV
and perform initial setup.
• See chapter 3, “TV Connections” for connec-
tion diagrams.
• See the following pages for initial TV setup and
use of the Auto Input Sensing feature.
• See chapter 6, “NetCommand,” to perform
NetCommand IR “learning” for control of your
home theater (available on LT-40134, LT-46144,
and LT-52144 models only).
7. Mitsubishi recommends you perform a channel
scan for channels received on ANT 1 and ANT 2.
See “Initial TV Setup” on the following pages.
8. You can now start watching TV or you can perform
additional setup and customization through the TV
menus.
Guidelines for Setting Up and Using Your New Widescreen TV
TV Operation
1. Review chapter 4, “TV Operation and Features,” for
TV features including:
•
Input Selection (viewing source). Select a
connected program source to watch, such as a
VCR, DVD player, or antenna. Press
INPUT on the
remote control to select from icons for the TV
inputs. See “Choosing a Viewing Source.”
• ChannelView. Press GUIDE to see channel
listings for programs on
ANT 1 and ANT 2. To
override ChannelView and use TV Guide Daily,
see chapter 5, “TV Menu Setings - Inputs
Menu.”
• Picture Formats. Press FORMAT to cycle through
picture sizes and shapes to find the one best
suited to the current program. See “TV Signals
and Display Formats.”
2. To understand use of the Input Selection menu
with NetCommand-controlled devices, see “Using
NetCommand” (LT-40134, LT-46144, and LT-52144
models only).
3. To view JPEG photo files on the TV, see “Viewing
JPEG Picture Files.”
Additional TV Setup
1. Review chapter 5, “TV Menu Settings,” to custom-
ize TV operation. Press the MENU key to enter the
menu system. Settings available include:
•
Fav. Use an on-screen menu to create custom
lists of your favorite channels. See
Setup >
Edit.
• TV Guide Daily (model LT-40134 only). Set up
and enable the TV Guide Daily system. See the
Inputs > Guide menu.
• Order. Rearrange the device icons in the Input
Selection menu to put frequently used icons
near the front. See the
Inputs menu Order
options.
• Name. Change the device names that appear
in the
Input Selection menu. See the Inputs
menu Name options.
2