MITSUBISHI ELECTRIC LT-40133 - Manual (Page 44)

44 5. TV Menu Settings
Setup Menu, continued
Setup Menu Options
Timer
Timer On, Off
Day Daily, Mon-Fri, (every) Sunday, (every) Monday, (every) Tuesday, etc.
Select the day or days of the week for the Timer to turn on the TV.
Time To set the time for the TV to come on:
1. With the hour highlighted, press repeatedly to change the hour and the
AM/
PM indicator. Press and hold to change the hour display quickly.
2. Press ENTER to highlight the minutes.
3. Press to change the minutes. Press and hold to change the minutes display quickly.
Input Ant-1, Ant-2, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined
and enabled inputs that appear in the
Input Selection menu.
Channel If the input is an antenna ( ANT 1, ANT 2), press repeatedly or press and hold to
scroll quickly through the available channel numbers.
Energy
Use the Energy Mode option to select the level of power consumption while the TV is turned off.
Energy
Mode Fast Power On The default setting.
Low Power Uses less energy, but TV power-on takes longer (approx. 60 sec.)
and some TV features may be unavailable.
Note: When the TV is
first powered off, it remains in Fast Power On mode for 30 seconds
before switching to low power mode. During that time, the TV will
turn on without the low power 60 sec. delay.
Keep this setting at Fast Power On if you need to:
• Have faster power on.
• Receive updates to ChannelView channel listings.
• Receive updates to the TV Guide Daily program listings. (model LT-40134 only)
• Keep the TV Clock accurate for the TV Timer. With the
Low Power setting, you must reset the
TV Clock if the TV is left turned off for over 48 hours.
Note: TV Guide Daily requires the Fast Power On setting. If you activate TV Guide Daily (model
LT-40134 only), the TV will automatically override a
Low Power setting and change to the Fast
Power On setting.
Use the Timer to set a time for the TV to turn on auto-
matically. Use this menu to set a day, time, input, and
channel for the Timer. If the TV is already on at the
requested time, the TV will automatically tune to the
designated channel.
• The TV clock must be set before you can use the
Timer feature.
• When the Timer turns on the TV, press any key on
the remote control to keep it on. Otherwise, the TV
will turn off after five minutes.
• The POWER/TIMER indicator flashes blue when the TV is
off to indicate the TV Timer has been set.
Setup menu, Timer options