Interphase Tech CONDOR 4221 - Manual (Page 31)

4221 Condor Hardware Installation Procedures
19
Table 2-6. Secondary Short I/O
* Factory Default
J16 Primary Short I/O Size / Reset Enable:
Table 2-7. Primary Short I/O Size
* Factory Default
(Pins 5-6) Secondary Master Control Register (MCR) Reset Enable (default = OUT)
IN = Reset Enable
OUT = Reset Disable
(Pins 7-8) Primary Master Control Register (MCR) Reset Enable (default = IN)
IN = Reset Enabled
OUT = Reset Disabled
J17 Secondary Channel Address Modifiers:
IN = Secondary Channel Address Modifiers 29 or 2D.
OUT = Secondary Channel Address Modifier 2D only.
J15 PINS SIZE (Bytes)
5-6 7-8
OUT OUT 256 bytes of Secondary Short I/O space
OUT IN 512 bytes of Secondary Short I/O space
IN OUT 1K bytes of Secondary Short I/O space
*IN *IN 2K bytes of Secondary Short I/O space*
J16 PINS SIZE (Bytes)
1-2 3-4
OUT OUT 256 bytes of Primary Short I/O space
OUT IN 512 bytes of Primary Short I/O space
IN OUT 1K bytes of Primary Short I/O space
*IN *IN 2K bytes of Primary Short I/O space*
J17