Interphase Tech CONDOR 4221 - Manual (Page 62)

Chapter 2 - Hardware Installation
50
Ethernet Dual Channel AUI Daughter Card
COMPONENT SIDE
Figure 2-8. Ethernet Dual Channel AUI Daughter Card
NOTE: LED3 is located on the solder side of the daughter card and is not shown in this illustration.
The Dual Channel AUI Ethernet Daughter Card provides two DB15 connectors as shown in Figure 2-8 above.
Table 2-18. Ethernet Dual Channel AUI Daughter Card LEDs
DESIGNATOR FUNCTION DESCRIPTION
LED3 +12 Volts When illuminated, indicates that +12 Volts is
present.
P3
P6
P5
D
B
1
5
P4
F1
D
B
1
5