IronPort Systems 4108GL - Manual (Page 136)

8-6
Time Protocols
SNTP: Viewing, Selecting, and Configuring
Ti
m
e
Pr
ot
o
c
o
ls
Figure 8-4. The System Information Screen (Default Values)
2. Press [E] (for Edit ). The cursor moves to the System Name field.
3. Use
[v] to move the cursor to the
Time Sync Method field.
4. Use the Space bar to select SNTP , then press
[v] once to display and move
to the SNTP Mode field.
5. Do one of the following:
• Use the Space bar to select the Broadcast mode, then press
[v] to
move the cursor to the Poll Interval field, and go to step 6. (For
Broadcast mode details, see "SNTP Operating Modes" on page 2.)
• Use the Space bar to select the Unicast mode, then do the
following:
i. Press
[>] to move the cursor to the
Server Address field.
Time Protocol Selection Parameter
– TIMEP
– SNTP
– None