IronPort Systems 4108GL - Manual (Page 203)

11-5
Optimizing Port Usage Through Traffic Control and Port Trunking
Viewing Port Status and Configuring Port Parameters
Po
rts: T
ra
ffic
C
o
n
tr
o
l
an
d T
run
ki
ng
Menu: Viewing Port Status and Configuring Port
Parameters
From the menu interface, you can configure and view all port parameter
settings and view all port status indicators.
Using the Menu To View Port Status. The menu interface displays the
status for ports and (if configured) a trunk group.
From the Main Menu, select:
1. Status and Counters . . .
4. Port Status
Figure 11-1. Example of the Port Status Screen
Using the Menu To Configure Ports.
N o t e The menu interface uses the same screen for configuring both individual ports
and port trunk groups. For information on port trunk groups, see “Port
Trunking” on page 11-10.
1. From the Main Menu, Select:
2. Switch Configuration...
2. Port/Trunk Settings
In this example,
ports A7 and A8
have previously
been configured
as a trunk group.