IronPort Systems 4108GL - Manual (Page 272)

13-14
HP Procurve Stack Management
HP Procurve Stack Management
HP
P
roc
urve
S
tack
M
ana
gem
e
n
t
Using the Menu Interface To View Stack Status and
Configure Stacking
Using the Menu Interface To View and Configure a
Commander Switch
1. Configure an IP address and subnet mask on the Commander switch.
(See Chapter 7, “Configuring IP Addressing”.)
2. Display the Stacking Menu by selecting Stacking in the Main Menu.
Figure 13-5. The Default Stacking Menu
3. Display the Stack Configuration menu by pressing [3] to select Stack
Configuration .