IronPort Systems 4108GL - Manual (Page 223)

11-25
Optimizing Port Usage Through Traffic Control and Port Trunking
Port Trunking
Po
rts: T
ra
ffic
C
o
n
tr
o
l
an
d T
run
ki
ng
Trunk Group Operation Using LACP
The switch can automatically configure a dynamic LACP trunk group or you
can manually configure a static LACP trunk group. The methods for displaying
N o t e LACP requires full-duplex (FDx) links of the same media type (10/100Base-T,
100FX, etc.) and speed, and enforces speed and duplex conformance across
a trunk group.
LACP trunk status include:
In most cases, trunks configured for LACP on the Switch 4108GL operate as
described in table 11-6:
Trunk Display Method Static LACP Trunk Dynamic LACP Trunk
CLI show lacp command Included in listing. Included in listing.
CLI show trunk command Included in listing. Not included.
Port/Trunk Settings screen in menu interface Included in listing. Not included