Integra CROMA24 - Manual (Page 115)

Assembly\Disassembly 115
ASSEMBL
Y/
DISASSEMBL
Y
Croma24 Service Manual
Install the Lower Roller Assembly and Stepper
Motor
NOTE
Ensure that the stepper motor wires are exiting the
motor casing in the “down” direction when completely
installed. The wires should be opposite from the holes
that secure the bracket to the platen.
1. Loosely attach the Stepper Motor to the Lower Roller bracket
using Stepper Motor hardware as shown in Figure 5-15.
2. Attach the Stepper Motor tension spring to the Stepper Motor
and the Lower Roller Bracket. Tighten the Stepper Motor
hardware to 8 in-lb of torque.