Integra CROMA24 - Manual (Page 121)

Assembly\Disassembly 121
ASSEMBL
Y/
DISASSEMBL
Y
Croma24 Service Manual
12. Secure the Lower Roller Assembly onto the Platen.
13. Attach the C-Bracket Assembly to the Platen by aligning the
bracket onto the bracket guide pins and securing with
attaching hardware. Ensure that the Pinch Rollers are
centered on the lower rollers and that tension is being applied
the the lower rollers.
14. Attach the Slide Shaft to the supports tightening to 15 in-lbs
of torque using 3mm hex head torque screwdriver.
15. Attach the ground strap to the left side of the Slide Shaft.
16. Perform the Carrier Assembly, Carrier Belt, and the Frame
Tensioner Reinstallation procedures to reinstall the Carrier
Assembly.