Integra DLV-100 - Manual (Page 12)

12
Remote Control Features
1. Infrared Transmitter
Direct the remote control toward the remote sensor on the projec-
tor cabinet.
2. Standby/On Button
If the main power is applied, you can use this button to turn your
projector on or put it in standby.
3. S-Video Button
Press this button to select an S-Video source from a VCR.
4. Video Button
Press this button to select an NTSC, PAL, SECAM or NTSC4.43
compatible video source from a VCR, DVD player, laser disc player
or document camera.
5. RGB Button
Press this button to select a video source from computer or compo-
nent equipment connected to your RGB port.
6. Auto Adjust Button
Use this button to adjust an RGB source for an optimal picture.
Some signals may not be displayed correctly or take time to switch
between sources.
7. Magnify + - Buttons
Use this button to adjust the image size up to 400%.
To change the position of the magnified screen, press one of the
▲▼
ᮤ ᮣ buttons to recall the magnifying glass, then use the
▲▼ ᮤ
ᮣ buttons to move the screen.
8. Volume + - Buttons
Press + button to increase the volume and - button to decrease
it.
9. ASPECT Button
Press this button to select the screen size.
10. Mute Button
This button turns off an image and sound for a short period of time.
Press again to restore the image and sound.
NOTE: When the menu is displayed, a press of this button mutes an image
and sound without turning off the menu.
11. PICTURE Button
Press this button to recall and display the screen-related menu.
12. Freeze Button
This button will freeze a picture. Press again to resume motion.
13. Menu Button
Displays the menu for various settings and adjustments.
14. LAMP RESET Button
If the lamp has been turned on for more than 1,600 hours (Normal
mode), the power to the unit will be cut off and no messages will
be displayed. Press and hold down this button for 10 seconds or
more while the unit is in stand-by mode to clear the lamp available
time and the lamp usage time.
Supplied Remote Control
INPUT
1
2
3
8
9
15
5
6
7
11
12
13
17 16
14
10
4
15. ▲▼ ᮤ ᮣ (Select) Buttons
▲,▼: Use these buttons to select the menu of the item you wish
to adjust.
ᮤ , ᮣ : Use these buttons to change the level of a selected menu
item.
A press of the
ᮣ button executes the selection.
When the magnifying glass is displayed, these
▲▼ ᮤ ᮣ
buttons move the magnifying glass.
16. Cancel Button
Press this button to exit "Menus". Press this button to return to the
previous menu without storing the current settings or adjustments
when you are in the submenu or adjustment screen.
17. Enter Button
Press this button to execute the selected item. When this is pressed,
the adjustments and settings are saved, and the display is returned
to the menu.