Integra DLV-100 - Manual (Page 35)

35
Menu Display Time :
This option allows you to select how long the projector waits after
the last touch of a button to turn off the menu.
The preset choices are "Manual", "Auto 5 sec", "Auto 15 sec", and
"Auto 45 sec". The "Auto 45 sec" is the factory preset.
Manual ....... The menu can be turned off manually.
Auto 5 sec .. The menu will automatically be turned off in 5 seconds if no but-
tons are pressed within 5 seconds.
Auto 15 sec ... The menu will automatically be turned off in 15 seconds if no
buttons are pressed within 15 seconds.
Auto 45 sec ... The menu will automatically be turned off in 45 seconds if no
buttons are pressed within 45 seconds.
Direct Button:
Volume Bar:
This option turns on or off the volume bar when you adjust the sound
volume using VOLUME +/- (up and down) button.
On .............. You can increase or decrease the sound volume with the volume
bar on screen.
Off .............. You can increase or decrease the sound volume without having to
use the volume bar.
Keystone Bar:
This option is not available on this model.
Setup
Enables you to set operating options.
Press "OK" to save your changes for all the features of Page 1, Page
2, Page 3, Page 4 and Page 5.
[Page1] [Page2]
Orientation:
This reorients your image for your type of projection.
The options are: desktop front projection, ceiling rear projection,
desktop rear projection, and ceiling front projection.
Cinema Position:
This feature selects the vertical position of the image when viewing
video with Cinema aspect ratio selected.
When Cinema aspect ratio is selected on earlier models, the image is
displayed with black borders on the top and bottom.
You can select the vertical position among three options:
Top ............. Image position is at the top with a black border on bottom.
Center ......... Image position is at the center with black borders on top and bot-
tom.
Bottom ........ Image position is at the bottom with a black border on top.
Background:
Use this feature to display a blue/ black screen or logo when no sig-
nal is available. The default background is Integra. You can change
the logo screen using the PC Card Files feature. See page 38.
Message:
You can choose the desired information to be displayed on the screen.
On .............. The message will be displayed.
Off .............. The message will not be displayed.
Source Display: You can turn on and off the information for input
name such as VIDEO and RGB.
When this option is on, the current input will be displayed each time
you switch sources or turn on the projector.
No Input: This option turns on or off the "No Input" message to be
displayed in the top right corner on the screen.
Projector Pointer:
This option is not available on this model.