Integra DLV-100 - Manual (Page 23)

23
Press the RGB, VIDEO or S VIDEO button on the remote
control, or the Source button on the projector cabinet to se-
lect “Video” (VCR, document camera, or laser disc player),
S-Video”, “RGB” (computer or DVD with component out-
put) or “PC Card Viewer” (slides on a CompactFlash card) to
display the image.
Or press the “Menu” button on the remote control or the cabi-
net and use the menu to select your video source: “Video”,
“S-Video”, “RGB” or “PC Card Viewer”.
NOTE: If no input signal is available, the projector will display an
Integra logo (factory preset).
Adjust the Image Size and the Focus
Use the Zoom ring to fine adjust the image size on the screen
Use the Focus ring to obtain the best focus.
Place your projector on a flat level surface and Ensure
that the projector is square to the screen.
Lift the front edge of the projector to center the image ver-
tically.
Move the projector left to center the image horizontally on
the screen.
Rotate the rear foot to make the image square to the screen.
Use keystone correction for proper adjustment.