Introduction, Introduction to the projector dlv-100, Getting started – Integra DLV-100 User Manual

Page 6

Advertising
background image

6

1. INTRODUCTION

Introduction to the Projector DLV-100

This section introduces you to your new Projector and describes the
features and controls.

Congratulations on Your Purchase of The Projector DLV-100
The DLV-100 is one of the very best projectors available today. The
DLV-100 enables you to project precise images up to 200 inches across
(measured diagonally) from your PC or Macintosh computer (desk-
top or notebook), VCR, DVD player, document camera, a laser disc
player or PC Card Viewer.
You can use the projector on a tabletop or cart, you can use the pro-
jector to project images from behind the screen, and the projector can
be permanently mounted on a ceiling*

1

. The remote control can be

used wirelessly.

Features you’ll enjoy:

• Simple set up and operation.
• A high-performance 135 watt NSH lamp.
• The supplied wireless remote control that operates the projector

from the front or rear.

• The image can be projected between 30 and 200 inches (mea-

sured diagonally).

• Keystone correction allows you to correct trapezoidal distortion

so that the image is square.

• You can choose between video modes depending on your source:

"normal" for a typical picture, "natural" for true color reproduc-
tion.

• The built-in PC Card Viewer allows you to start your presenta-

tion even when a PC is not available at the site.

• The "Capture" enables you to capture the current projected im-

age.

• An image can be projected from in front or behind a screen, and

the projector can even be installed on the ceiling.

• An exclusive Advanced AccuBlend intelligent pixel blending

technology - an extremely accurate image compression technol-
ogy - offers a crisp image with UXGA (1600

ן1200) resolu-

tion*

2

.

• Supports most IBM VGA, SVGA, XGA, SXGA/UXGA (with

Advanced AccuBlend)*

2

, Macintosh, component signal (YCbCr

/ YPbPr) or any other RGB signals within a horizontal frequency
range of 15 to 100 kHz and a vertical frequency range of 50 to
120 Hz. This includes NTSC, PAL, PAL-N, PAL-M, PAL60,
SECAM and NTSC4.43 standard video signals.

NOTE: Composite video standards are as follows:

NTSC: U.S. TV standard for video in U.S. and Canada.
PAL: TV standard used in Western Europe.
PAL-N: TV standard used in Argentine, Paraguay and Uruguay.
PAL-M: TV standard used in Brazil.
PAL60: TV standard used for NTSC playback on PAL TVs.
SECAM: TV standard used in France and Eastern Europe.
NTSC4.43: TV standard used in Middle East countries.

• The supplied remote control can be used without a cable.
• You can control the projector with a PC using the PC Control

port.

• USB terminal allows USB mouse operation*

3

.

• The contemporary cabinet design is light, compact, easy to carry,

and complements any office, boardroom or auditorium.

*1 Do not attempt to mount the projector on a ceiling yourself.

The projector must be installed by qualified technicians in order
to ensure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the pro-
jector and the installation must be in accordance with any local
building codes. Please consult your dealer for more information.

*2 A UXGA (1600

ן1200) and SXGA image (1280ן1024) are

displayed.

*3 The USB terminal meets the USB1.1 specification and accepts a

USB mouse only.

Getting Started

The fastest way to get started is to take your time and do everything
right the first time. Take a few minutes now to review the instruction
manual. This may save you time later on. At the beginning of each
section of the manual you’ll find an overview. If the section doesn’t
apply, you can skip it.

Advertising