InFocus MaxFlight MT3000(B) - Manual (Page 20)

EMERGENCY PROCEDURE
POSTINGS
Emergency Stop Procedure
The Red Emergency Stop Button, located on the side of the command consol, MUST be depressed
IMMEDIATELY. This will deactivate the Electric Motors. The unit will need to be leveled manually on
both the Pitch and Roll axes. Located on the back of the Lift Motor is the manual brake release knob.
SLOWLY turn the knob clockwise until the unit lowers from the elevated position. Adjust the lowering
speed by the amount you turn the knob. After the ride has lowered, open the canopy, raise the harness
restraints and aide the patrons in exiting
if necessary.
Ride and Facility Evacuation Procedure
Terminate Game Play from the host PC.
Quietly and calmly, have the Queue line
begin exiting the facility. Lower the
unit, open the canopy, raise the
harness(s) and unbuckle the patron(s),
then assist with the evacuation of the
facility.