Inter-Tel 8690 - Manual (Page 4)

2
R EDIALING A N UMBER
From the endpoint interface, do one of the following:
• Tap , and then tap REDIAL .
• Tap .
P LACING A C ALL ON H OLD
While on the call, do one of the following:
• From the endpoint interface, tap .
• From the Active Calls view, tap .
To return to the call, tap , , or the flashing button.
T RANSFERRING A C ALL
To transfer a call from the Active Calls view:
1. Select the call, tap , and then type the extension or outside num-
ber in the Call Transfer dialog box.
2. Tap OK to transfer the call and disconnect your endpoint.
To transfer a call from the endpoint interface:
1. Tap XFR , and then do one of the following:
• If you are transferring the call to a subscriber, dial the extension num-
ber.
• If you are transferring the call to an outside number, tap OUTGOING or
the Outgoing Call access code ( ), and then dial the number.
2. Wait for an answer, announce the call (if desired), and then hang up.
If the extension transferred to is unavailable, tap the flashing button to
return to the caller.
U
SING
R
EACH
M
E
To use Reach Me from the Routing view:
1. Tap , and then tap Change.
2. Select a Reach Me option from the drop-down list (if applicable, enter a
forwarding number, and then tap Ok .
To use Reach Me from the endpoint interface:
1. Tap REACH ME or .
2. Tap BROWSE , and then tap NEXT / PREVIOUS to scroll through the
options.
3. Tap ACCEPT or to accept the Reach Me setting.
If you selected SEND CALLS TO , enter the extension or outside number,
and then tap ACCEPT or .
0 0
9
5 6 0
#
#