Inter-Tel 8690 - Manual (Page 57)

43
Inter-Tel ® Model 8690 Endpoint User Guide
BA
S
IC
FEA
T
URES
To place a conference call from the endpoint interface:
1. While on the first call, tap CNF to place the call on hold.
2. Add the conference parties:
• If you are adding a subscriber, dial the extension number.
• If you are adding an outside party, tap
OUTGOING or the Outgoing Call
access code ( ). Then dial the number.
Announce the conference, and then tap CNF to place the call on hold.
3. After gathering the conference parties, tap CONN TO CNF to start the confer-
ence. A confirmation notice appears.
To place your endpoint on hold and remove yourself from the conference:
Tap
. This places your endpoint on hold without disconnecting the parties. To
return to the conference, tap the flashing button.
To add a party to the conference:
1. Do one of the following:
• From the Active Calls view, tap
.
• From the endpoint interface, tap ADD PARTY .
2. Call the party to be added to the conference, announce the conference, and then
tap
(Active Calls view) or CNF (endpoint interface).
3. Tap (Active Calls view) or CONN TO CNF (endpoint interface) to
reconnect to the conference with the added party.
To drop out of the conference:
1. Tap (Active Calls view) or CNF (endpoint interface).
2. Hang up. This removes you from the conference but leaves the other parties con-
nected.
To reconnect to the conference: Tap (Active Calls view) or the flash-
ing button (endpoint interface).
9
CNF IN PROGRESS