IBM System Storage Subsystem DS5020 - Manual (Page 194)

Storage subsystem and controller information record
Table 22 provides a data sheet for recording storage subsystem names,
management types, Ethernet hardware addresses, and IP addresses. Make a copy
of this table and complete the information for your storage subsystems and
controllers. Use the information to set up the BOOTP table for the network server
and the host or Domain Name System (DNS) table. The information is also helpful
if you add storage subsystems after initial installation. Refer to your Storage
Manager documentation for detailed instructions about how to obtain the
information. For a sample information record, see Table 23 on page 165.
Table 22. Storage subsystem and controller information record
Storage
subsystem
name
Management
method Controllers-Ethernet and IP
addresses, and host name Host-IP address
and host name
164 IBM System Storage DS5020 Storage Subsystem: Installation, User’s, and Maintenance Guide