Cornelius SID650A/80 - Manual (Page 31)

28 91704
YES
3. DISPENSER PROBLEM
NO
DOES
AGITATOR
ROTATE?
1. CHECK MOTOR CAPACITOR.
2. CHECK TIMER SWITCH #5.
3. CHECK AGITATOR MOTOR.
IS
VOLTAGE AT
SOLENOID
103-126V.?
1. CHECK FOR BURNED OUT SOLENOID.
2. CHECK FOR STUCK OR BINDING GATE
MECHANISM.
IS
HOPPER LEVEL
TOO HIGH?
1. CHECK FOR BLOWN SOLENOID FUSE IN ELEC-
TRICAL BOX. IF FUSE IS BLOWN, CHECK FOR
STUCK GATE MECHANISM, BURNED OUT SOLE-
NOID, OR LOW VOLTAGE.
2. CHECK VEND SWITCH.
3. CHECK FOR LOOSE OR BROKEN WIRE CONNEC-
TION IN SOLENOID CIRCUIT.
4. CHECK VOLTAGE PROBLEMS IN 1.
1. CHECK BIN THERMOSTAT
ADJUSTMENT.
2. REPLACE BIN THERMOSTAT.
IS
ICE SLUSHY?
DONE
1. CHECK HOPPER DRAINS.
2. CHECK LEVEL OF UNIT.
3. CHECK FOR WATER OVERFLOW FROM EVAP-
ORATOR. SEE SECTION 2.
4. CHECK ADJUSTMENT OF TIMER CAM #5.
(AGITATION)
5. CHECK TIMER SWITCH #5.
YES
YES
YES
YES
NO
NO
NO
NO
DOES
GATE OPEN?