IBM Partner Pavilion DS4100 - Manual (Page 84)

1. On the end of the LC-LC cable that connects into the SFP module or host bus
adapter, press down and hold the lever to release the latches, as shown in
Figure 43.
Lever
Latches f10ug018
2. Carefully pull on the connector to remove the cable from the SFP module, as
shown in Figure 44.
3. Replace the protective caps on the cable ends.
4. Replace the protective cap on the SFP module.
Using LC-SC fibre-channel cable adapters
The LC-SC fibre-channel cable adapter is a fiber-optic cable that is used to connect
an LC connector into one of the following devices that require SC connectors:
v 1-Gbps fibre channel switch
v Fibre channel host bus adapter
For more information about connecting to these devices, see the documentation
that comes with the LC-SC fibre-channel cable adapter.
Figure 43. LC-LC fibre-channel cable lever and latches
f10ug017
Figure 44. Removing the LC-LC fibre-channel cable
52 IBM TotalStorage DS4100 Storage Server: Installation, User’s, and Maintenance Guide