Vlan and gvrp status, Description – Intel NetStructure 470 User Manual
Page 118
112
C
H
A
P
T
E
R
5
Intel® NetStructure™ 470T and 470F Switches User Guide
VLAN and GVRP Status
Description
This screen is available only if there are active tag-based (IEEE 802.1Q)
VLANs on the switch. The screen shows information about one VLAN at a
time. Press N or P to view status information for other tag-based VLANs
on the switch.
GARP status: Displays whether the VLAN can process GVRP requests.
Number of IEEE 802.1Q VLANs: Displays the total number of tag-based
VLANs (both static and dynamically created) currently configured.
IEEE 802.1Q VLAN ID: Displays the VLAN ID of the selected tag-based
VLAN.
Current egress ports: Lists all ports that belong to the selected tag-based
VLAN.
Current untagged ports: Lists all ports that are configured to strip 802.1Q
VLAN information from packets leaving the switch.
Status: Displays whether the VLAN is static or dynamic. A permanent
(static) tag-based VLAN is created and configured by the switch
administrator. A dynamic VLAN is created by the switch in response to
GVRP requests from GVRP-enabled network nodes.
Creation time since switch power up: Displays the amount of time the
VLAN has been active since the switch was rebooted.
LOCATION
Main Menu
Monitoring
VLAN/GVRP Status