Ip settings, Description – Intel NetStructure 470 User Manual
Page 60
54
C
H
A
P
T
E
R
5
Intel® NetStructure™ 470T and 470F Switches User Guide
IP Settings
Description
Switch MAC address: Displays the unique hardware address assigned by
Intel.
Current Settings: Displays the switch’s current IP configuration.
New settings: Assigns a new IP configuration to the switch.
Assign IP: Indicates if the switch uses a BOOTP or DHCP server to
obtain an IP address dynamically, or if you assign an address manually.
IP address: Displays the IP configuration used by the switch. Use the
IP address shown here to access the switch through Telnet or a ping test.
Subnet mask: Matches the mask for other devices on the network.
Default gateway: Displays the IP address of the device that routes to
different networks—typically, a router or routing server. Set this option
to manage the switch remotely.
VLAN or VLAN ID (port-based or tag-based VLANs only): Specifies
a VLAN where the switch’s SNMP management agent will reside. This
option appears only when port-based and tag-based (IEEE 802.1Q)
VLANs are active on the switch.
SUBMIT: Submits the changes and returns to the Configure Device screen.
You must save the changes to the switch’s flash memory (from the Save
Settings menu) and then reboot the switch for the new IP settings to take
effect.
LOCATION
Main Menu
Configure Device
IP Settings
NOTE
The default IP address for the
switch is 192.0.2.1
Default VLAN for SNMP agent
Port-based: DEFAULT_VLAN
tag-based (802.1Q-based):
VID=1