Description – Intel NetStructure 470 User Manual
Page 95
89
Using Local Management
C
H
A
P
T
E
R
5
Local Management
Add an IEEE 802.1Q VLAN (Configure
Port Membership)
Description
VLAN Name: Assigns a name to the VLAN. The name can consist of any
character (no spaces) and be up to 12 characters long. After a VLAN is
created the name cannot be changed.
VLAN ID: Assigns a unique ID number for the VLAN. This number is
used to identify all packets belonging to that VLAN. Type a number from 2
to 4094. The DEFAULT_VLAN (created when you select a VLAN mode)
has a VID of 1.
Allow IGMP Snooping: Indicates if the switch performs IGMP snooping
on this VLAN (press
z). A maximum of 12 IGMP snooping
sessions are allowed.
Member: Identifies which ports are part of the VLAN being created. Press
z to toggle the following options:
<Yes>
The port is a member of the VLAN.
<No >
The port is not a member of the VLAN.
–
The port is part of an aggregated link.
NEXT: Sends you to the Add an IEEE 802.1Q VLAN (Configure Port
Tagging) screen.
LOCATION
Main Menu
Configure VLAN
Create an 802.1Q VLAN
NOTE
A ‘+’ next to the Member indicates
that the port is a member of more
than one VLAN.