List of factory defaults – Intel NetStructure 470 User Manual

Page 133

Advertising
background image

127

Technical Information

A

P

P

E

N

D

I

X

Appendix

List of Factory Defaults

• Software upgrade mode: Network

• TFTP Server Address: 0.0.0.0

• Load configuration file: Disabled

• Console baud rate: 9600

• Console port data bits: 8

• Console port stop bit: 1

• IGMP Snooping: Disabled

• System port partition state: Enabled

• Lock Address Table: Disabled

• MAC Address Aging (sec): 300

• System HOL-blocking state: Enabled

• System console timeout : 15 minute

• System IGMP timeout: 300 sec

• System IP address: 192.0.2.1

• System Subnet mask: 255.255.255.0

• System Default gateway: 0.0.0.0

• System BootP request: Enabled

• Port Nway state: Enabled (Auto-Negotiate)

• Port flow control state: Auto-Negotiate

• Port back pressure state: Auto-Negotiate

• Port priority state: Use Frame Tag

• Port HOL state: Enabled

• Ping IP address: 0.0.0.0

• Ping repeat time: 1 time

• Ping timeout: 5 sec

• Port Mirroring state: Disabled

• Port Mirroring source port: 1

• Port Mirroring destination port: 2

• System Spanning tree state: Disabled

• System Bridge Max age: 20 sec

• System Bridge Hello time: 2 sec

• System Bridge Forward delay: 15 sec

• System Bridge Priority: 32768

• System aging time: 300 sec

• Per Port spanning tree path cost: 10

• Per Port spanning tree priority: 128

• Per port state: Enabled

• Per Port spanning tree state: Enabled

• Read community string: "public"

• Write community string: "private"

• Console user account: No username

• Console user password: No password

Advertising