Logon screen, Description – Intel NetStructure 470 User Manual
Page 56
50
C
H
A
P
T
E
R
5
Intel® NetStructure™ 470T and 470F Switches User Guide
To useTelnet
1
Open a Telnet application. In Windows 98 or Windows NT*, select
Run from the Start Menu, and then type telnet and press
E.
2
On the Terminal menu, select Preferences. Make sure the emulation
type is VT-100/ANSI and that VT100 arrows are enabled.
3
On the Connect menu, select Remote System. Enter the IP address of
the switch and click Connect.
4
Log on to Local Management. By default, no password or user name is
assigned. To assign them, see the section titled “Administer User
Accounts” in this chapter.
Logon Screen
Description
By default, no username or password is assigned to the switch. Press
E twice to log on to the Local Manager. Usernames and passwords
can consist of any characters and can be up to 15 characters long.
Remember that usernames and passwords are also case sensitive.