Icom IC-R1500 - Manual (Page 15)

10
3
SETTING A FREQUENCY
3
■
Receive mode selection
Receive modes are determined by the physical properties of
the radio signals. The receiver has 6 receive modes: LSB
USB, CW, AM, WFM and FM modes. The mode selection is
stored independently in each memory channels.
Typically, AM mode is used for the AM broadcast stations
(0.495–1.620 MHz) and air band (118–135.995 MHz), and
WFM is used for FM broadcast stations (76–107.9 MHz).
q Push and hold [TS•MODE] for 1 sec. to enter receive
mode select mode.
w Rotate [DIAL] to select the desired mode.
e Push any key to exit receive mode select mode.
[DIAL]
[TS•MODE]