Icom IC-R1500 - Manual (Page 28)

23
5
MEMORY OPERATION
■
Memory bank selection
q Push [MR•SKIP] to select memory mode.
w Push [MR•SKIP] again to enter memory type selection
mode.
e Rotate [DIAL] to select the desired bank (A to H, J to R, T,
U, W or Y).
• Only programmed banks are displayed.
r Push any key to set the bank indication.
• Bank’s indicator appears at top of the memory channel.
t Rotate [DIAL] to select the contents in the bank.
y To return to regular memory mode, repeat steps w – r and
select “bAnk --” at step e .
• Memory bank indication
■
Transferring bank contents
[
The bank contents of programmed memory channels can be
cleared or transferred to another bank.
INFORMATION: Even if the bank is cleared of memory
channels, the memory channel contents still remain pro-
grammed.
q Select the desired bank contents to be transferred or
erased from the bank.
➥
Push [MR•SKIP] to select memory mode.
➥ Push [MR•SKIP] again then rotate [DIAL] to select the
desired memory bank.
➥ Push any key to select the bank then rotate [DIAL] to
select the desired contents.
w Push [S.MW•MW] to enter select memory write mode.
• “ ! ” indicator and the memory channel number blink.
[MR•SKIP] [DIAL] Bank’s indicator appears
Bank indicator appears
[MR•SKIP] [DIAL]