Icom IC-R1500 - Manual (Page 46)

41
9
SET MODE
D D Memory name setting
Sets memory name appearance ON (appear) and OFF (does
not appear; default).
This item appears when set mode is accessed from memory
mode only.
D D Memory bank link function
Sets the memory bank link function ON and OFF (default).
The link function provides continuous banks scan, that scans
all contents in the selected banks during bank scan.
This item appears when set mode is accessed from memory
mode only.
• Bank link setting
q Rotate [DIAL] to select the memory bank link function ON.
w Push and hold [SET•LOCK] or [S.MW•MW] for 1 sec. to
enter bank link setting mode.
e Push [SET•LOCK] or [S.MW•MW] to select the desired
bank to be linked.
• A : Bank A • b : Bank B • C : Bank C • d : Bank D
• E : Bank E • F : Bank F • G : Bank G • H : Bank H
• J : Bank J • k : Bank K • L : Bank L • m : Bank M
• n : Bank N • o : Bank O • P : Bank P • q : Bank Q
• r : Bank R • t : Bank T • U : Bank U • W: Bank W
• y : Bank Y
r Rotate [DIAL] to select “On” to linking the bank.
t Repeat steps e and r to set the link condition.
y Push [TS•MODE] or any key below the display to return to
set mode.
Bank A ON Bank A OFF