Icom IC-R1500 - Manual (Page 27)

22
5
MEMORY OPERATION
5
The IC-R1500 has a total of 21 banks (A to H, J to R, T, U,
W, Y). Regular memory channels, 0 to 999, may assigned
into the desired bank for easy memory management.
q Select the desired memory channel.
➥
Push [MR•SKIP] to select memory mode, then rotate
[DIAL] to select the desired memory channel.
• “ ! ” and memory channel number appear.
w Push [S.MW•MW] to enter select memory write mode.
• “ ! ” indicator and the memory channel number blink.
e Push [TS•MODE] once to select “bAnk.”
r Rotate [DIAL] to select the desired bank and bank channel.
• Push [SET•LOCK] to toggle the bank or bank channel selection.
• Banks A to H, J to R, T, U, W and Y are available.
• Only vacant bank channel numbers will be displayed.
t Push and hold [S.MW•MW] for 1 sec. to program the bank
and exit select memory write mode.
Bank selection Bank channel selection
[TS•MODE]
After [TS•MODE]
released
■
Memory bank setting [