Icom IC-R1500 - Manual (Page 26)

21
5
MEMORY OPERATION
■
Memory clearing
Contents of programmed memories can be cleared (erased),
if desired.
q Push [V/MHz•SCAN] to select VFO mode.
w Push [S.MW•MW] to enter select memory write mode.
• “ ! ” and the memory channel number blink.
e Rotate [DIAL] to select the memory channel to be cleared.
r Push [TS•MODE] three times to select “CLEAR,” then
push and hold [S.MW•MW] for 1 sec.
• 3 beeps sound.
• The cleared channel display changes to blank
• “
! ” and the memory channel number blink continuously.
t Push [V/MHz•SCAN] to return to VFO mode.
☞ NOTE: Be careful!— the contents of cleared memories
CANNOT be recalled.
[EXAMPLE]: Clearing memory channel 20.
Push to select VFO. Rotate for selecting memory channel. Push .
Push to return to VFO. Push three times, then push for 1 sec.
Beep
Beep
Beep
“
“
“
“
“