JVC KD-AVX33 - Manual (Page 105)

OPERATIONS
25
ENGLISH
4
• Auto: When multi-channel digital signals come
in, “MULTI” surround is activated.
When 2-channel or 2.1-channel signals come in,
“4CH STEREO” is activated.
• Through: All incoming channel signals are sent
to the corresponding speakers.
• Dolby PL II Movie: Activates Dolby Pro Logic II
Movie.
• Dolby PL II Music: Activates Dolby Pro Logic
II Music. You can adjust <Panorama> and
<Center Width> settings. (☞ below)
To change the <Dolby PL II Music> setting
in step 4 above...
1
2
• Panorama: Select <On> to add wraparound
sound effect.
• Center Width: Adjust the center image so it
may be heard only from the center speaker,
only form the left/right front speaker as a
“phantom” center image, or various combination
of these speakers. As the number increases, the
“phantom” effect becomes stronger (normally
select <4>).
3
On the remote controller:
• You cannot change the <Dolby PL II Music>
settings using the remote controller.
Surround On
Auto
Through
Dolby PLII Movie
Dolby PLII Music
Set ENT
Surround On
Panorama
Auto
Through
Dolby PLII Movie
Dolby PLII Music
Dolby PLII Music
On
Panorama
CenterWidth
* 1 Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are
trademarks of Dolby Laboratories.
* 2 “DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
KD-AVX33[E]_0130.indb 25 KD-AVX33[E]_0130.indb 25 07.2.1 4:44:14 PM 07.2.1 4:44:14 PM