English – JVC KD-AVX33 User Manual

Page 226

Advertising
background image

ENGLISH

68

Symptoms

Remedies/Causes

Bluetooth

• Bluetooth device does not detect the unit.

This unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio device at a time.
While connecting a device, this unit cannot be detected
from another device. Disconnect currently connected device
and search again.

• The unit does not detect the Bluetooth

device.

• Check the Bluetooth setting of the device.
• Search from the Bluetooth device. After the device

detects the unit, select <Open> on the unit to connect
the device. (☞ page 34)

• The unit does not make pairing with the

Bluetooth device.

• Enter the same PIN code for both the unit and target

device. If the PIN code of the device is not indicated on its
instructions, try “0000” or “1234.”

• Select the device name from <Special Device>, then

try to connect again. (☞ page 35)

• Echo or noise occurs.

Adjust the microphone unit position.

• Phone sound quality is poor.

• Reduce the distance between the unit and the Bluetooth

audio device.

• Move the car to place where you can get a better signal

reception.

• The sound is interrupted or skipped during

playback of a Bluetooth audio device.

• Reduce the distance between the unit and the Bluetooth

audio device.

• Disconnect the device connected for “Bluetooth phone.”
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the device

again.

• “New Device” cannot be selected for

“Bluetooth Audio.”

Bluetooth audio device is being connected. To select “New
Device,” disconnect it. (☞ page 35)

• The connected audio device cannot be

controlled.

Check whether the connected audio device supports AVRCP
(Audio Video Remote Control Profile).

CD changer

• “No Disc” appears on the monitor.

Insert a disc into the magazine.

• “No Magazine” appears on the monitor.

Insert the magazine.

• “Cannot play this disc Check the disc” appears

on the monitor.

Disc does not include playable files. Replace the disc with
playable files.

• “Reset 08” appears on the monitor.

Connect this unit and the CD changer correctly and press
the reset button of the CD changer.

• “Reset 01” – “Reset 07” appears on the

monitor.

Press the reset button of the CD changer.

• The CD changer does not work at all.

Reset the unit. (☞ page 3)

Book 1.indb 68

Book 1.indb 68

07.2.1 8:23:16 PM

07.2.1 8:23:16 PM

Advertising
This manual is related to the following products: