Electrical connections – JVC KD-AVX33 User Manual

Page 381

Advertising
background image

3

To prevent short circuits, we recommend that you disconnect the battery’s negative terminal and make all
electrical connections before installing the unit.
• Be sure to ground this unit to the car’s chassis again after installation.

Typical connections

Before connecting: Check the wiring in the vehicle carefully. Incorrect connection may cause serious
damage to this unit.
The leads of the power cord and those of the connector from the car body may be different in color.

1

Connect the colored leads of the power cord in the order specified in the illustration below.

2

Connect the antenna cord.

3

Finally connect the wiring harness to the unit.

15 A fuse

Rear ground terminal

To an external component
(see diagram )

To parking brake (see diagram )

Yellow

*

4

USB cable (see diagram )

*

3

Not included for this unit

*

4

Before checking the operation of this unit prior

to installation, this lead must be connected,
otherwise power cannot be turned on.

To metallic body or chassis of the car

To a live terminal in the fuse block
connecting to the car battery (bypassing the
ignition switch) (constant 12 V)

To an accessory terminal in the fuse block

To automatic antenna if any (250 mA max.)

Fuse block

Black

Red

Blue

Blue with white stripe

Orange with white stripe

Brown

Light green

To car light control switch

To cellular phone system

To the remote lead of other equipment (200 mA max.)

Ignition switch

White with

black stripe

White

Gray with

black stripe

Gray

Green with

black stripe

Green

Purple with

black stripe

Purple

Left speaker (front)

Right speaker (front)

Left speaker (rear)

Right speaker (rear)

PRECAUTIONS on power supply and speaker connections:

• DO NOT connect the speaker leads of the power cord to the car battery; otherwise, the

unit will be seriously damaged.

• BEFORE connecting the speaker leads of the power cord to the speakers, check the speaker wiring in

your car.

ELECTRICAL CONNECTIONS

Connections for external component playback

KS-HP2

Cordless headphones (not supplied)

*

5

KV-MR9010

9-INCH WIDESCREEN
MONITOR (not supplied)

Video cord (not supplied)

*

5

To listen to disc playback sound while in Dual Zone operations (see page 26 of

INSTRUCTIONS).

*

6

Audio cord (not supplied)

Camcorder, rear view camera, etc.

A

Navigation System

Instal3-4_KD-AVX33[A].indd 4

Instal3-4_KD-AVX33[A].indd 4

07.2.21 11:06:02 AM

07.2.21 11:06:02 AM

Advertising
This manual is related to the following products: