Jotul GF 100 DV II - Manual (Page 13)

13
GF 100 DV II Nordic QT
GF 200 DV II Lillehammer
Wall Shield Installation
The decorative Wall Shield, included in the Miscellaneous
Hardware bag, is used to obscure the vent hole in the
wall in installations vented directly off the rear of the
stove. Follow this procedure:
1. Remove the top two 1/4” hex head screws from the
rear shroud of the stove.
2. Align the holes in the wall shield with the holes in the
rear shroud.
3. Secure the wall shield to the stove with the two 1/4”
hex head screws. See fig. 16.
Figure 15. Termination Clearance to overhangs
Figure 15.
Wall Shield installation.
3”
76 mm
12 ”
305
mm
2 1/2”
64 mm
Figure 13. Horizontal Termination with Vertical Rise.
Wall Thimble
and Trim Collar
Max. 4 ft.
Horizontal
Run
Max. Two
90° Elbows
or One 90°
and Two
45° Elbows
Max. 15 ft.
Vertical Vent
Run