Juniper Networks J-series Services Router J2320 - Manual (Page 288)

WARNING: ¡Atención! Para reducir el riesgo de incendios, usar sólo líneas de
telecomunicaciones de calibre No. 26 AWG o más gruesas.
WARNING: Varning! För att minska brandrisken skall endast Nr. 26 AWG eller större
telekommunikationsledning användas.
Installation Safety Guidelines and Warnings
Observe the following guidelines and warnings before and during Services Router
installation:
■ Chassis Lifting Guidelines on page 266
■ Installation Instructions Warning on page 266
■ Rack-Mounting Requirements and Warnings on page 267
■ Ramp Warning on page 271
Chassis Lifting Guidelines
The weight of a fully populated chassis is approximately 15.9 lbs (7.2 kg) for a J2320
Services Router, 18.2 lbs (8.3 kg) for a J2350 Services Router, 25.3 lbs (11.5 kg) for
a J4350 Services Router, and 30.7 lb (13.9 kg) for a J6350 Services Router. Observe
the following guidelines for lifting and moving a Services Router:
■ Before moving the Services Router, read the guidelines in “Preparing for Router
Installation” on page 103 to verify that the intended site meets the specified
power, environmental, and clearance requirements.
■ Before lifting or moving the Services Router, disconnect all external cables.
■ As when lifting any heavy object, lift most of the weight with your legs rather
than your back. Keep your knees bent and your back relatively straight and avoid
twisting your body as you lift. Balance the load evenly and be sure that your
footing is solid.
Installation Instructions Warning
WARNING: Read the installation instructions before you connect the router to a
power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
266 ■ Safety Guidelines and Warnings
J2320, J2350, J4350, and J6350 Services Router Getting Started Guide