Juniper Networks J-series Services Router J2320 - Manual (Page 29)

The J6350 Services Router supports the following field-replaceable PIMs and Avaya
VoIP modules:
■ Gigabit Ethernet uPIM (1–port, 6-port, 8-port, and 16-port)
■ SFP Gigabit Ethernet ePIM (1 port)
■ Copper Gigabit Ethernet ePIM (1 port)
■ Dual-Port Serial PIM
■ Dual-Port E1 PIM
■ Dual-Port T1 PIM
■ E3 PIM (1 port)
■ DS3 (T3) PIM (1 port)
■ Dual-Port Fast Ethernet PIM
■ Dual-Port Channelized T1/E1/ISDN PRI PIM
■ 4-port Fast Ethernet ePIM
■ G.SHDSL PIM (2 ports)
■ 4-port ISDN BRI S/T or U PIM
■ ADSL 2/2+ Annex A PIM (1 port)
■ ADSL 2/2+ Annex B PIM (1 port)
■ TGM550 Telephony Gateway Module
■ TIM508 Analog Telephony Interface Module (8 ports)
■ TIM510 E1/T1 Telephony Interface Module (1 port)
■ TIM514 Analog Telephony Interface Module (4 ports)
■ TIM516 Analog Telephony Interface Module (16 ports)
■ TIM518 Analog Telephony Interface Module (16 ports)
■ TIM521 ISDN BRI Telephony Interface Module (4 ports)
J-series Software Features and Licenses
J-series Services Routers provide the software features listed in Table 5 on page 7.
You must purchase a separate software license to obtain some software features.
For more information about licenses, see “Installing and Managing J-series
Licenses” on page 161.
Table 5: Summary of J-series Features and License Requirements
Separate License J-series Feature Feature Category
IPv4 Internet Protocols
IPv6 routing and forwarding
J-series Software Features and Licenses ■ 7
Chapter 1: Overview of Services Routers