Format a disc (dvd deck only), Format a dvdram disc, Format a dvdrw disc – JVC DR-MV1B User Manual

Page 87: Pg. 87, Pg. 87), Format a dvd-ram disc, Format a dvd-rw disc

Advertising
background image

Masterpage:Right+

EN

87

Filename [DR-MV1SEK_10Subsidiary.fm]

Page 87

April 15, 2004 3:21 pm

SUBSIDIARY SETTINGS

Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.

Format A DVD-RAM Disc

1

Press VCR/DVD repeatedly so that the DVD lamp lights up on

the unit.

2

Press SET UP to access the Main Menu screen.

3

Press rt w e to select “DVD SET UP”, then press ENTER.

4

Press w e to select “UTILITY”,

then press ENTER.

5

Press rt to select “FORMAT”,

then press ENTER. Press w e to
select “YES”, then press ENTER
when “DISC WILL BE
FORMATTED” appears on the TV
screen.

6

Press w e to select “OK”, then

press ENTER when “DISC FORMATTING WAS SELECTED”
appears on the TV screen.

Format A DVD-RW Disc

1

Perform steps 2 to 4 of “Format A DVD-RAM Disc” on the above

before continuing.

2

Press rt to select “FORMAT”, then press ENTER. Press w e

to choose “VR MODE” or “VIDEO MODE”, then press ENTER
when “DISC WILL BE FORMATTED” appears on the TV screen.
“VR MODE”:

To be chosen when you want to record, erase, or
edit data on the disc repeatedly.

“VIDEO MODE”: To be chosen when you want to erase all the data

on the disc once played back to record new data,
or play back the disc on other DVD players.

3

Press w e to select “YES”, then press ENTER when “DISC

WILL BE FORMATTED IN VR MODE/VIDEO MODE” appears on
the TV screen.

NOTES:

● It is impossible to format Version 1.0 DVD-RW discs in Video mode.

● It is impossible to format DVD-R discs.

● All the programmes on a disc will be deleted once the disc is

formatted even if they are protected titles. (

੬ pg. 61)

Format A Disc (DVD Deck Only)

ATTENTION:

● When a disc is formatted, all recordings and data are erased. It is

impossible to restore them.

● Never turn off the unit or disconnect the mains power cord while

“NOW FORMATTING...” is displayed on the TV screen.

● Turn on the unit.

● Turn on the TV and select the AV mode.

● Slide the TV/CABLE/SAT/DVD switch to DVD.

● Load a DVD-RAM/RW disc to format.

1

4

7

2

5

8

0

3

6

9

ENTER

SET UP

rtw e

VCR/DVD

SAT

DR-MV1SEK_00.book Page 87 Thursday, April 15, 2004 3:30 PM

Advertising