JVC DR-MV1B - Manual (Page 94)

Filename [DR-MV1SEK_10Subsidiary.fm]
Masterpage:Left+
94
EN
Page 94 April 15, 2004 3:21 pm
TROUBLESHOOTING
● An invalid PlusCode number has been input. (੬ pg. 45)
● To set the timer programme using the VIDEO Plus+ system, the
Guide Program number must be set in advance. ( ੬ pg. 83)
● Appears when you tried to input a PlusCode number during
timer recording or instant timer recording.
● A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. ( ੬ pg. 8)
● When an incompatible disc is loaded, 4 has been pressed.
( ੬ pg. 8)
● Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. ( ੬ pg. 11, 87)
● Finalising is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. ( ੬ pg. 11, 88)
● Cancelling disc finalisation is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry. ( ੬ pg. 11,
88)
● During Live Memory playback, 8 has been pressed. (੬ pg. 34)
● Timer recording has finished during Live Memory playback.
● Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
● An attempt has been made to record copy-protected contents.
● An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible, such as DVD-R.
● The unit has detected invalid contents at the start or in the
middle of playback.
● An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
● Check the connection. (੬ pg. 71)
PlusCode NO. ERROR
CONFIRM PlusCode NO. THEN RETRY
GUIDE PROGRAMME IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
CAN NOT SET VIDEO Plus+ TIMER PROGRAMMING DURING
TIMER RECORDING OR INSTANT TIMER RECORDING
CANCEL TIMER RECORDING OR INSTANT TIMER RECORDING,
THEN ENTER THE PlusCode NO. AGAIN
REGION CODE ERROR
CHECK DISC
UNREADABLE DISC
CHECK DISC
COULD NOT FORMAT THE DISC
CHECK THE DISC
COULD NOT FINALISE THE DISC
CHECK THE DISC
COULD NOT CANCEL DISC FINALISATION
CHECK THE DISC
PRESS [STOP] AGAIN TO STOP RECORDING
TIMER RECORDING COMPLETED
PLAYBACK WILL STOP
THEN TIMER RECORDING WILL START
COPY PROHIBITED
CAN NOT RECORD
COPY PROHIBITED
CAN NOT PLAY
THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT
RECOGNIZED
MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY AND
POWERED ON
DR-MV1SEK_00.book Page 94 Thursday, April 15, 2004 3:30 PM