JVC LPT0976-001B - Manual (Page 43)

Masterpage:Right+
EN
43
Filename [MX1SEU_08VHS Operation.fm]
BASIC OPERATIONS ON VHS DECK
Page 43Monday, 6 December 2004 14:01
Next Function Memory
The Next Function Memory AtellsB the unit what to do after rewinding.
Before continuing, make sure the unit is in the Stop mode.
For Automatic Start Of Playback
Press
O, then press I within 2 seconds.
Repeat Playback
Your unit can automatically play back the whole tape 100 times
repeatedly.
1
Press I to start playback.
2
Press and hold I for over 5 seconds, then release.
● AxB lights up on the front display panel.
● After playing back a tape 100 times, the unit stops
automatically.
3
Press o at any time to stop Repeat Playback.
● Pressing I, O, N or W also stops Repeat Playback.
Manual Tracking
Your unit is equipped with automatic tracking control. During
playback, you can override this and adjust the tracking manually by
pressing the PR buttons.
1
During playback, press PR +/– on the unit simultaneously to
activate manual tracking.
2
Press PR +/– to adjust the tracking manually.
● To return to automatic tracking, press PR +/– simultaneously or
eject and insert the tape again.
NOTE:
When a new tape is inserted, the unit enters the automatic tracking
mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks (HI-FI L,
HI-FI R and NORM) and will play back the one you select.
During Playback
Pressing AUDIO changes the soundtrack as follows:
NOTES:
● AHI-FI L W X RB should normally be selected. In this mode, Hi-Fi
stereo tapes are played back in stereo, and the normal audio
track is played back automatically for tapes with only normal
audio.
● For instructions on recording stereo and bilingual programmes,
refer to page 45.
● AO.S.D.B must be set to AAUTOB or the on-screen displays will not
appear. (A pg. 81)
VHS Progressive Scan
You can watch the images on VHS deck in the Progressive scan
mode via component video.
ATTENTION:
Your TV needs to be compatible with Progressive and to have
Component video input connectors.
1
Press HDD or DVD so that the HDD or DVD lamp lights up on
the unit.
2
Set AL-1 OUTPUTB to ACOMPONENTB (A pg. 72), and the
Progressive-compatible TV to its component input mode.
3
Press PROGRESSIVE SCAN for 3 or more seconds.
● The video output indicator q lights up on the front display
panel.
4
Press VHS so that the VHS lamp lights up on the unit, then
press PROGRESSIVE SCAN.
● ACOMP OFFB is displayed on the front display panel. It will be
displayed for 5 seconds.
5
Press PROGRESSIVE SCAN again within 5 seconds.
● ACOMP ONB is displayed on the front display panel and q
lights up on the front display panel.
● The VHS progressive scan image will then be outputted from
the [COMPONENT VIDEO OUT (Y/P
B
/P
R
)] connectors.
NOTES:
● Be sure to engage the HDD or DVD deck in stop mode.
● It is possible to watch in interlace mode through the component
video connection (
AL-1 OUTPUTB set to ACOMPONENTB) simply
by pressing PROGRESSIVE SCAN to switch to ACOMP ONB.
However, q will not light up on the front display panel as the
image outputted is not in progressive mode.
TRACK
USE
On-Screen Display
HI-FI
L W X R
For HI-FI stereo tapes
HI-FI
L W
For main audio of Bilingual tapes
HI-FI
X R
For sub audio of Bilingual tapes
NORM For audio-dubbed tapes
HI-FI
NORM
For audio-dubbed tapes
MX1SEU_00.book Page 43 Monday, December 6, 2004 2:01 PM