Tray lock (dvd deck only), Recorded. (a pg. 82) when dub, Gh 82) – JVC LPT0976-001B User Manual

Page 82

Advertising
background image

Filename [MX1SEU_13Subsidiary.fm]

Masterpage:Left+

82

EN

SUBSIDIARY SETTINGS

Page 82Monday, 6 December 2004 14:01

8

AUTO SP

N

LP TIMER

^

ON /

OFF

When this function is set to

AONB, the unit automatically switches to

LP mode to allow complete recording if there is not enough tape to
record the entire programme while timer-recording in SP mode.

For Example:
Recording a programme of 140 minutes in length onto a 120-
minute tape.

Make sure you set this function to

AONB, before the timer-recording

starts.

NOTES:

If you have programmed the unit to timer-record 2 or more
programmes, the second programme and those thereafter may
not fit on the tape if you set

AAUTO SPNLP TIMERB to AONB. In

this case, make sure the mode is not engaged, then set the tape
speed manually during timer programming.

In order to ensure that the recording fits on the tape, this feature
may leave a slight non-recorded section at the end of the tape.

There may be some noise and sound disturbance at the point on
the tape where the unit switches from SP to LP mode.

The Auto SPNLP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work properly
on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and
T(ST)-120.

8

COLOUR SYSTEM

^

PAL

/

NTSC

/

MESECAM

You can play back PAL, NTSC and MESECAM tapes, or record
PAL and SECAM* signals on this unit. Select the appropriate
colour system.

* SECAM signals will be recorded as MESECAM on this unit; MESECAM is

the designation for tapes with SECAM signals that have been recorded on
a MESECAM-compatible PAL video cassette recorder.

PAL

/

NTSC

:

To record PAL signals, or play back a PAL or NTSC tape.

MESECAM

:

To record SECAM signals, or play back a MESECAM tape.

NOTES:

SECAM signals recorded on the HDD or DVD deck are played
back as PAL signals. As such, when dubbing to VHS deck, make
sure to set

ACOLOUR SYSTEMB to APAL/NTSCB.

About NTSC Playback

Some TVs shrink the picture vertically and place black bars at the
top and bottom of the TV screen. This is not a malfunction on the
part of either the unit or the TV.

The picture may roll up and down. This can be corrected using
the V-HOLD control found on some TVs. (This cannot be
corrected if the TV does not have a V-HOLD control.)

The counter and tape remaining time readings will be incorrect.

During search, still, or frame-by-frame playback, the picture will
be distorted, and there may be a loss of colour.

Depending on the type of TV, the top and bottom portions of
superimposed displays may be cut off during NTSC playback.

You can lock the disc tray to prohibit the unwanted disc ejection by
children.

To lock tray
While the unit is turned off, press and hold

o, then press M on the

unit.

ALOCKB appears on the front display panel and the disc tray is

locked.

To unlock tray
While the unit is turned off, press and hold

o, then press M on the

unit.

AUNLOCKB appears on the front display panel.

SP mode

LP mode

Total 140 minutes

Approximately 110 minutes

Approximately 30 minutes

Tray Lock (DVD Deck Only)

Turn off the unit.

M

o

MX1SEU_00.book Page 82 Monday, December 6, 2004 2:01 PM

Advertising
This manual is related to the following products: