JVC LPT0976-001B - Manual (Page 67)

Masterpage:Right+
EN
67
Filename [MX1SEU_12Editing.fm]
EDITING
Page 67 Monday, 6 December 2004 14:01
Dubbing From VHS To DVD
(Dubbing A Programme From Cassette)
It is possible to dub a single title (programme) of a cassette from
the VHS deck to the DVD deck using the
A1 PROG.B dubbing.
1
Load the cassette you want to dub.
● Set APICTURE CONTROLB to AEDITB. (A pg. 81)
2
Press DUBBING to access the Dubbing Menu screen.
3
Press FGD E to select AVHSNDVDB, then press ENTER.
4
Press D E to select A1 PROG.B, then press ENTER.
5
Press F G to select ASELECT REC. MODEB, then press
ENTER. Press F G to select the desired option, then press
ENTER.
6
Press G to select ACONFIRMB, then press ENTER. The
confirmation screen appears.
7
Press VHS so that the VHS lamp lights up on the unit.
The current display on the screen will be switched to a receiving
broadcast display.
8
Press AUDIO to select the playback sound.
9
Press I to locate the point from where you want to start
dubbing, then press W.
VHS deck enters the record pause mode.
10
Press DVD so that the DVD lamp lights up on the unit.
The current display on the screen will be switched to the
dubbing screen.
11
Press D E to select AEXECUTEB, then press ENTER for
confirmation.
● To cancel the dubbing, press o then D E to select ACANCELB
and press ENTER to confirm.
12
Upon completing dubbing, the tape stops and ADUBBING
COMPLETED B appears on the TV screen. Press ENTER to
end.
NOTES:
● AO.S.D.B is automatically set to AOFFB. It will return to AAUTOB
after dubbing is completed.
● The programme information at the VHS deck will not be dubbed.
● Dubbing copyright guarded tape is not possible.
● When you select AEDITB to dub tapes in step 1, be sure to select
ANORMB after you finish dubbing the tapes.
● When dubbing is in progress, only o is functional.
About Disc Remaining Display
When dubbing from HDD to DVD, the unit displays the time
information for dubbing by bar meter. By comparing the disc
remaining time and the necessary time for dubbing of the selected
items, it is possible to check if the dubbing can be performed
completely or not.
When performing the High Speed Dubbing
When performing the Just Dubbing
● The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
● The total time of a loaded disc is displayed on the right of the bar
meter.
When performing the Manual Dubbing
● The unit displays the status on the assumption that the selected
items are dubbed in the lowest transfer rate.
● The available highest transfer rate is displayed on the right of the
bar meter.
NOTE:
The bar meter moves up and down regularly, but this is not a
malfunction.
21%
Capacity of a disc Remaining capacity
Dark green: Length of already recorded item
Light green: Length of selected item
Yellow: Length of the item now being selected by arrow
Red: Excess over the capacity
TOTAL 105MIN
MAX FR240
MX1SEU_00.book Page 67 Monday, December 6, 2004 2:01 PM