JVC LPT0976-001B - Manual (Page 71)

Masterpage:Right+
EN
71
Filename [MX1SEU_12Editing.fm]
EDITING
Page 71 Monday, 6 December 2004 14:01
You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
1
Connect another recorder’s 21-pin SCART connector to the
unit’s 21-pin SCART connector as illustrated.
A When using your unit as the source player:
^ connect its [L-1 IN/OUT] connector to the recording deck.
B When using your unit as the recording deck:
^ connect its [L-2 IN/DECODER] connector to the source
player.
● If another recorder is compatible with the Y/C signal: (HDD &
DVD deck only)
^ when using your unit as the source player, set AL-1
OUTPUT B to ASCART S-VIDEOB. (A pg. 72)
^ when using your unit as the recording deck, set AL-2
SELECT B to AS-VIDEOB. (A pg. 72)
2
When using this unit as the recording deck, press VHS/HDD/
DVD SELECT on the unit repeatedly to select the recording
deck.
3
When using this unit as the recording deck, press PR +/– to
select
AL-2B.
For HDD/DVD deck
● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)
4
When using this unit as the recording deck, press REC MODE
repeatedly to set the recording mode.
5
Engage the Play mode of the source player.
6
Engage the Record mode of the recording deck.
7
Stop recording on the recording deck, then stop playback on
the source player.
NOTES:
● All necessary cables can be obtained from your dealer.
● For Y/C signal input/output, be sure to use a 21-pin SCART cable
that is compatible with the Y/C signal.
● When you use this unit as the source player for editing, be sure to
set
ASUPERIMPOSEB or AO.S.D.B to AOFFB before starting.
(A pg. 80, 81) If you are using another recorder with S-Video
and Audio output connectors, connect its S-Video and Audio
output connectors to this unit’s [S-VIDEO] and [AUDIO] input
connectors on the front panel. Then, set the unit’s input mode to
AF-1B in step 3, and set AF-1 INPUTB to AS-VIDEOB. (A pg. 73)
Edit To Or From Another Recorder
Player Your unit
Another recorder
Recorder
TV receiver
Player
Your unit
Another recorder
Recorder
A When using your unit as the source player
B When using your unit as the recording deck
TV receiver
21-pin SCART cable
(supplied)
21-pin SCART cable
(not supplied)
21-pin SCART cable
(not supplied)
21-pin SCART
cable (supplied)
● Slide the TV/CABLE/SAT/DVD switch to DVD.
MX1SEU_00.book Page 71 Monday, December 6, 2004 2:01 PM