Juniper Networks E-Series - Manual (Page 29)

E-Series Routers
E-Series Routers 1-7
The ERX-705 chassis is the same as the ERX-710 chassis (see Figure 1-6
and Figure 1-7 ). The chassis contains seven slots to accommodate
modules. Installation procedures and operating procedures are identical
for both systems. All ERX-7xx/14xx models use the same SRP I/O
module, but different power input modules are used.
Note: The router may look different from the routers shown in the figures in this
chapter, depending on the line modules in the slots.
Figure 1-6 ERX-7xx model, front view
Figure 1-7 ERX-7xx model, rear view
PCMCIA slot
SRP module
Fan tray
Line module
g013729
SRP I/O module
I/O
modules
Power switches
Power input
module
g013730